Points on Edge

 

▒ Overview

IMG_C_ICON_DOT.gifCreate a points based on the input intervals on edges.

 

▒ Methodology


 
Interval Length: Input the node spacing in the current length unit.
 
Number of Divisions: Divides the selected line into multiple divisions, specified by the input number.
 
Linear Grading (Length): Input the spacing between the start and end points of a line to automatically set the node positions through linear interpolation.
 
Linear Grading (Ratio): Input the spacing ratio (end/start) between the start and end points of a line.
 
Hyperbolic Tangent: Input the start length and number of divisions to specify the nodes positions considering the total length of the line and number of divisions.
 
 
[Preacusions]
- Points on Edge function is generating points. That doesn't mean that the places(edge/face) where points generated are not automatically divided.
- It's totally the same way to give seed when making meshes.